When you use the IPCONFIG /ALL command, it displays the configuration information for all your interfaces, as in:

Windows IP Configuration

Host Name . . . . . . . . . . . . : jsi001
Primary Dns Suffix . . . . . . . : JSIINC.COM
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : JSIINC.COM

Ethernet adapter Internet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX NIC (3C905B-TX)
Physical Address. . . . . . . . . : 00-51-AD-67-1A-3E
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : xxx.xxx.xxx.xxx
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . : yyy.yyy.yyy.yyy
DNS Servers . . . . . . . . . . . : zzz.zzz.zzz.zzz
aaa.aaa.aaa.aaa
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter JSIINC:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink Server 10/100 PCI (3C980B-TX)
Physical Address. . . . . . . . . : 00-51-AD-27-1E-813
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.1
When you use the netsh interface ip show config command, it shows configuration information for all your interfaces, like"
Configuration for interface "Internet"
DHCP enabled: No
IP Address: xxx.xxx.xxx.xxx
SubnetMask: 255.255.255.248
Default Gateway: yyy.yyy.yyy.yyy
GatewayMetric: 0
InterfaceMetric: 1
Statically Configured DNS Servers: zzz.zzz.zzz.zzz
aaa.aaa.aaa.aaa
Statically Configured WINS Servers: None
Register with which suffix: None

Configuration for interface "JSIINC"
DHCP enabled: No
IP Address: 192.168.0.1
SubnetMask: 255.255.255.0
InterfaceMetric: 0
Statically Configured DNS Servers: 192.168.0.1
Statically Configured WINS Servers: None
Register with which suffix: Primary only
If you wish to display IP configuration information for a specific interface, use:

netsh interface ip show config "Interface Name"

Example

Typing netsh interface ip show config "JSIINC" returns:
Configuration for interface "JSIINC"
DHCP enabled: No
IP Address: 192.168.0.1
SubnetMask: 255.255.255.0
InterfaceMetric: 0
Statically Configured DNS Servers: 192.168.0.1
Statically Configured WINS Servers: None
Register with which suffix: Primary only
NOTE: How can I rename an interface (Local Area Connection) from the command-line?

NOTE: How do I retrieve an interface \{GUID\}?

NOTE: How can I locate the registry key for the TCPIP service parameters interface for my LAN?