A. Below is a summary of all the net.exe usage methods.
net accounts
Used to modify user accounts. Specified on its own will give information
about the current logon.
Options:
| /forcelogoff:<minutes or no> |
Minutes until the user gets logged off after logon hours expire. No means a
forced logoff will not occur |
| /lockoutthreshold:<number of failed attempts> |
This parameter allows you to configure the number of failed logon attempts
before the account is locked. The range is 1 to 999. |
| /lockoutduration:<minutes> |
This parameter specifies the number of minutes accounts remain locked
before automatically becoming unlocked. The range is 1 to 99999. |
| /lockoutwindow:<minutes> |
This parameter lets you configure the maximum number of minutes
between two consecutive failed logon attempts before an account is locked. The
range is 1 to 99999. |
| /minpwlen:<length> |
Minimum number of characters for the password. Default is 6, valid range is
between 0 and 14 |
| /maxpwage:<days> |
Maximum number of days a password is valid. Default is 90, valid range is
between 0 and 49710 |
| /minpwage:<days> |
Number of days that must occur before the password can be changed. Default
is 0, valid range is between 0 and maxpwage |
| /uniquepw:<number> |
Password may not be reused for number attempts |
| /sync |
Forces a domain sync |
| /domain |
Performs any of the above actions on the domain controller |
net computer
Used to add and remove computer accounts from the domain.
Options:
| \\<computer name> |
Name of the computer to be added or removed |
| /add |
Add the specified computer |
| /del |
Removes the specified computer |
net config server
Allows modifications to the server service. Entered with no parameters give
details of the current configuration
Options:
| /autodisconnect:<minutes> |
Number of minutes an account may be inactive before disconnection. Default
is 15, valid range between 1 and 65535. -1 means never disconnected. |
| /srvcomment:"text" |
Set the comment for the machine |
| /hidden:<yes or no> |
Specified is the computer is hidden in the listing of computers |
net config workstation
Allows modifications to the workstation service. Entered with no parameters
give details of the current configuration
Options:
| /charcount:<bytes> |
Number of bytes to be collected before data is sent. The default is 16,
valid range is between 0 and 65535. |
| /chartime:<msec> |
Number of milliseconds NT waits before sending data. If charcount is also
set whichever is satisfied first is used. Default is 250, valid range is
between 0 and 65535000. |
| /charwait:<seconds> |
Number of seconds NT waits for a communications device to become available.
Default is 3600, valid is between 0 and 65535. |
net continue <service name>
Restarts the specified paused service.
net file
Lists any files that are open/locked via a network share.
Options:
| id |
Identification of the file (given by entering net file on its own) |
| /close |
Close the specified lock |
See Q. How can I tell who has which files open on a machine? for more details.
net group
Adds/modifies global groups on servers. Without parameters will list global
groups.
Syntax:
net group <group name> [/command:"<text>"]
[/domain]
net group <group name> [/add [/comment:"<text>"] or
/delete] [/domain]
net group <group name> <user name> /add or /delete [/domain]
Options:
| groupname |
Name of the global group |
| /comment:"<text>" |
Comment if a new global group is created. Up to 48 characters |
| /domain |
Performs the function on the primary domain controller |
| username |
Username to which apply the operation |
| /add |
Adds the specified user to the group or the group to the domain |
| /delete |
Removes a group from a domain or a user from a group |
net localgroup
Performs actions on local groups. Same parameters as net group.
net name
Adds/removes a name to which messaging may be directed to. Running the
command on its own will list all messaging names eligible on the machine.
Options:
| name |
The messaging name to be added/removed |
| /add |
Add the name |
| /delete |
Remove the name |
net pause <service name>
Used to pause a service from the command line.
net print
Used to list/modify print jobs.
Options:
| \\computername |
Indicates the computer that hosts the printer queue |
| sharename |
Name of the printer queue |
| job |
The job number to modify |
| /hold |
Pauses a job on the print queue |
| /release |
Removes the hold status of a job on the print queue |
| /delete |
Deletes a job off of the print queue |
net send
Sends a message to a computer, user or messaging name.
Options:
| name |
Name of the user, computer or messaging name. Can also use * to send to
everyone in the group |
| /domain:<domain name> |
All users in the current domain or the specified domain |
| /users |
To all users connected to the server |
| message |
The message to send |
net session
Lists or disconnects sessions. Used with no options lists the current
sessions.
Options:
| \\<computer name> |
The computer of whose session to close |
| /delete |
Closes the session to the computer specified. Omitting a computer name will
close all sessions |
net share
Used to manage shares from the command line.
Syntax:
net share <sharename>=<drive>:\<directory>
[/users=<number> or /unlimited] [/remark:"text"]
net share <sharename> [/users=<number> or /unlimited]
[/remark:"text"]
net share <sharename or device name or drive and path> /delete
Options:
| <sharename> |
Name of the share |
| <device name> |
Used to specify the printer name if specifying a printer share |
| <drive>:<path> |
Absolute path |
| /users:<number> |
Number of simultaneous connections to the share |
| /unlimited |
Unlimited usage |
| /remark:"<text>" |
Comment for the share |
| /delete |
Delete the specifed share |
net start <service name>
Start the specified service
net statistics [workstation or service]
Gives information about either the server or workstation service.
net stop <service name>
Stops the specified service
net time
Used to synchronize the time of a computer.
Options:
| \\<computer name> |
The name of the computer to which synchronize the time |
| /domain:<domain> |
Synchronize the time with the specified domain |
| /set |
Sets the time |
net use
Connects or disconnects to a network share. Used with no qualifiers lists
the current network mappings.
Syntax:
net use <device name> or * \\<computer name>\<share name>
[password or *] [/user:[domain\user] /delete or [persistent:[yes or no]]
net use <device name> /home /delete or /persistent:[yes or no]
Options:
| <device name> |
Name of the device to map to. Use * to use the next available device name
|
| \\computer name |
The name of the computer controlling the resource |
| \sharename |
Name of the share |
| \volume |
Name of the volume if on a NetWare server |
| password |
Password to which to map |
| * |
Gives a prompt to which to enter the password |
| /user:<domain>\<user> |
Specifies the user to connect as |
| /home |
Connects to a users home directory |
| /delete |
Closes a connection |
| /persistent:[yes or no> |
Sets if the connection should be reconnected at next logon |
net user
Used to add/create/modify user accounts
Syntax:
net user <username> [password or *] [/add] [options] [/domain]
net user <username] /delete /domain
| username |
The name of the account |
| password |
Assigns or changes a password |
| * |
Gives a prompt for the password |
| /domain |
perform on a domain |
| /add |
Creates the account |
| /delete |
Removes the account |
| /active:[yes or no] |
Activates or deactivates the account |
| /comment:"<text>" |
Adds a descriptive comment |
| /counterycode.nnn |
nnn is the number operating system code. Use 0 for the operating systems
default |
| /expires:<date or never> |
The expiry date of the account. Date format is mm,dd,yy or dd,mm,yy which
is determined by the country code |
| /fullname:"<name>" |
The full name of the account |
| /homedir:<path> |
Path for the users home directory |
| /passwordchg:[yes or no] |
Used to specify if the user can modify the password |
| /passwordreq:[yes or no] |
Used to determine if the account needs a password |
| /profilepath:<path> |
Used to specify the profile path |
| /scriptpath:<path> |
Path of the logon script |
| /times:<times or all> |
Hours user may logon |
| /usercomment:"<text>" |
A comment for the account |
| /workstations:<machine names> |
Names the user may logon to. * means all. |
net view
Lists shared resources on a domain. Used with no parameters lists all
machine accounts in a domain.
Options:
| \\computer name |
Specifies the computer whose resource should be viewed |
| /domain:<domain name> |
The domain to be used |
| /network:<NetWare network> |
A NetWare network to be used |
)
)
)
Register
If I use:
C:\>NET USER test password /ADD /EXPIRES:NEVER
the user 'test' should be created with never expiring password 'password'.
But if I check this user with the user manager, the 'Password never expires' checkbox is still unchecked.
How can I be sure that the password never expires?
Kind regards,
Wim.
Van Balen Wim March 12, 2001